Cybex Eezy S Twist +2 Travel System

Using just one hand, you can easily fold this stroller down into a compact space which can stand freely. Perfectly fitting into small and tight car boot spaces or cupboards at home.

As it can stand by itself, you don’t need to worry about leaving marks on the walls.

These wheels are made of a gel material, which means they can never burst on those long walks. This solid material makes it ideal for walks in the town centre or in a stroll through the park.

With the built-in suspension, vibrations are reduced, guaranteeing a comfortable ride for your baby and keeping them sleeping.

Simply attach the newborn nest for a baby or the car seat adapters to use the stroller as a travel system. This means you can change the pram based on the needs you have.

If you’re going out on long walks, the nest is the best sleeping accessory for your baby. But if you’re going to be in and out of the car often, the car seat adapters prevent unnecessary disruption, keeping your baby calm and relaxed.

To change the seat unit from forward to rearward facing position, this can be performed without having to remove it from the chassis. Simply lift the legrest and you can simply rotate it around.

Recline the backrest into a fully lie-flat position. This is optimal for when your baby falls asleep when out on a walk. Simply pulling at the tab lets you bring this back up to a seated position when they wake up again.

Shield your from the weather with this XXL sun canopy. Made of a UPF 50+ protective fabric, this is the safest material for harmful UV rays.

The Cloud T i-Size features the tried and tested Linear Side-impact Protection (L.S.P.) System for increased protection.

The first impact forces of a collision are reduced by the extended side protector facing the door. Together with the car seat’s flexible shell, it reduces impact forces by up to 25%, channelling them away from your child.

This significantly protects your baby from side impact collisions.

The newborn inlay allows your baby to snugly fit inside the car seat. Your baby is protected in an ergonomically correct position.

This is suitable for babies from 45 – 60 cm. Once they have outgrown the inlay simply remove it from the car seat and continue using it as normal, giving your baby some additional room.

The adjustable headrest offers an amazing 12 positions for a customised adjustment as your baby grows. This means the car seat adapts to the size of your baby, growing with them.

The integrated harness guide makes adjusting intuitive and quick. All you need to do is ensure the headrest is at the correct height for your baby. This will position the harness in the correct setting.

These safety features can be fitted to your growing baby within seconds, offering maximum protection.

The generous sun canopy, made from a UPF 50+ fabric, significantly protects your baby from harmful rays of the sun.

It can also act as a shield against wind, or even the hustle and bustle of the street. When not in use, the canopy can be pulled back.

Let your baby enjoy cool temperatures, no matter the time of year, thanks to the improved ventilation system. Featuring a 3D mesh insert, which improves breathability, coolness and comfort, making long journeys more luxurious for your baby.

The car seat can be reclined to an ergonomic, lie-flat position when your baby falls asleep. This is a universal lie flat mechanism, with the legs jutting forward and bottom raising up as the backrest drops down. With a smooth transition from lie flat to seated, your baby won’t wake up if they’ve fallen asleep.

This is especially useful when on the Isofix base, as your baby can be positioned in a lie flat setting on those long car drives, keeping them much happier.

You can connect the car seat to the matching Base T. This is significantly safer than a standard seat belt, as there are metal on metal connections to the chassis of your car.

Once attached to the base, it can be rotated to make getting your baby in and out of the car far easier than before.

Compatible with the Cloud T and Sirona T car seat family, the base can be used with multiple car seats, growing with your baby. Once your baby has outgrown the infant carrier, you can use the next stage car seat afterwards. This makes the base suitable to 105 cm, which is about 4 years of age.

This means you won’t need to get a new base, check if it’s compatible with your car and learn all its installation instructions again when your baby outgrows the infant carrier.

Once your car seat has been attached, you can rotate the car seat in a full 360° angle. Simply spin the car seat to face the door to take your baby in or out of the car and then spin it back to a forwards or rearwards facing position.

As long as your baby is less than 15 months of age, they must be in a rearward position, as it is significantly safer for them. After this, you can choose whether it is forward facing or not.

Equipped with an easy and secure on-click installation. Simply line the connectors to the Isofix points in your car and press in for them to connect. Then bring down the load leg, which provides additional stability and support to the car seat.

Featuring an installation indicator, this helps prevent you from incorrectly installing the Isofix and car seat with a clear traffic-light system. Red tells you it is not connected, while green means everything is correct.

The base even has an electronic beeper built into it. This will also notify you if the car seat is attached and the base is not securely connected with a constant alarm.

As your baby goes from infant carrier to toddler car seat, they can face a forward facing position after 15 months. At the front of the Isofix is a latch, which you change depending on how old your baby is.

Once your baby has outgrown the Cloud T and moves to the Sirona T, you pull this latch down and it allows the Isofix to lock in the forward setting. This ensures your baby always faces the safest possible position.

The Aton B2 i-Size features the tried and tested Linear Side-impact Protection (L.S.P.) System for increased protection, just like the Cloud Z2.

The extended side protector facing the door reduces the first impact forces of a collision. This reduces impact forces by up to 25%, channelling them away from your child, together with the car seat’s flexible shell.

This significantly protects your baby from side impact collisions.

The newborn inlay allows your baby to snugly fit inside the car seat. Your baby is protected in this ergonomically correct position.

This is suitable for babies from 45 – 60 cm. Simply remove the inlay from the car seat once your baby has outgrown it and continue using the seat as normal, giving your baby some additional room.

The adjustable headrest offers an amazing 11 positions for a customised adjustment as your baby grows. The car seat adapts to the size of your baby, growing with them.

Adjusting is quick and intuitive with the integrated harness guide. All you need to do is ensure the headrest is at the correct height for your baby. The harness will be in the correct setting after this.

These safety features can be fitted to your growing baby within seconds, offering maximum protection.

The generous sun canopy, made from a UPF 50+ fabric, significantly protects your baby from harmful rays of the sun.

It can also act as a shield against wind, or even the hustle and bustle of the street. When not in use, the canopy can be pulled back.

You can connect the car seat to the matching Base Z2. This is significantly safer than a standard seat belt, as there are metal on metal connections to the chassis of your car.

Once attached to the base, it can be rotated to make getting your baby in and out of the car far easier than before.

Equipped with an easy and secure on-click installation. Simply line the connectors to the Isofix points in your car and press in for them to connect. Then bring down the load leg, which provides additional stability and support to the car seat.

Featuring an installation indicator, this helps prevent you from incorrectly installing the Isofix and car seat with a clear traffic-light system. Red tells you it is not connected, while green means everything is correct.

All of this will notify you if the car seat is attached and the base is not securely connected with a constant alarm.