Cybex Balios S Lux 2023 Travel System

This innovative suspension bar gives plenty of additional bounce to the pram. Situated just below the seat, it ensures your baby has a smooth and comfortable ride when out and about.

Working in combination with the front wheel and rear axle suspension, any bumps on the paths you take won’t wake up your baby.

The new and improved shopping basket has deeper walls than before, allowing you to store plenty inside, whether it’s after a big shop or planning for a picnic. Able to carry up to 10 kg, this basket can carry a lot.

It has also been designed to be very accessible, making it easy to reach the contents without having to bend over.

Easily collapsed with just 1 hand, the Balios S Lux is practical for modern parents on the go. Once folded, the pram will automatically lock shut and can even stand up by itself.

You don’t even need to remove the seat unit if you want to fold the stroller, it can be done with the seat still attached.

Tailor the push experience to the perfect height for you. Simply squeeze the central mechanism and then set the handlebar to the setting that is best for you.

Made of a cool and comfortable leatherette, it is the perfect material for your hands.

These specialist wheels can tackle the trickiest of terrains or kerbs. The small front wheels make the stroller extremely manoeuvrable while the back wheels increase the suspension of the system, giving your baby a comfy ride.

All the wheels are made from a special EVA foam, which is puncture-proof. This means you never need to pump up the wheels.

Lined with a soft fabric which is fully breathable, this is perfect for your baby, as it can now be used for overnight sleeping. This is perfect for when you go away during a weekend and don’t want to bring a travel cot with you.

If you do use it for overnight sleeping, make sure the apron is removed and the hood pulled down, giving your baby plenty of fresh air circulation.

Inside the hood is a panel which can be opened for additional air flow to your baby. This is ideal for when it gets a bit hot and you want to cool baby down during summer. The fine mesh ensures that no insects can get inside and disturb your baby.

You can even use it as a viewing port to see and play with your baby. When not in use, simply zip it closed again.

Just as with the seat unit, the carrycot also features memory buttons. Once pressed in, these remain activated until the carrycot has been removed from the seat unit.

This is especially useful, as leaning over can put a lot of pressure on the core and will be uncomfortable after birth.

To reattach the carrycot to the chassis, simply line it up and press firmly down until you hear a loud click.

This large and reversible seat unit can be positioned in multiple reclined angles, giving your baby the best setting if they are awake or have fallen asleep.

Adapting with your baby as they grow, it can be placed in a forward or parent facing orientation by easily slotting on and off of the chassis.

Keep your baby well protected from the weather with an extremely large canopy, featuring an extendable panel if they need additional protection.

Made from a UPF 50 + protective fabric, they will be safe from the sun’s UV rays. By opening the hood, there is also a ventilation panel available for additional air flow.

Instead of having fiddly straps to adjust the harness, you can change the tightness by pulling on the lower strap. Done exactly the same way as a car seat, this method is much easier than before.

The 5 point safety harness securely keeps your baby in the seat. With the bumper bar, they will find it impossible to leave the stroller unattended.

Lined with a fully breathable 3D mesh material, your baby will be cool and comfortable during hot days, preventing them from sweating. When it gets colder, the mesh instead traps hot air and keeps them cosy and snug instead, perfectly adapting to any weather environment.

The rest of the seat is made of a soft and plush fabric, which is ideal for a young baby.

If your baby falls asleep, you can adjust the footrest to a horizontal position. By raising their legs, it will help with their blood flow and ensure a smoother and undisturbed sleep.

When they wake up you can pull this down instead and let them stretch their legs. There are 2 small levers at the base, which when squeezed can let you set the desired position.

Implementing memory buttons, it is fantastically easy to remove the seat from the chassis. Once pressed in, they remain activated until the seat has been disconnected.

The big benefit is that you don’t need to lean over the seat to remove, which can put pressure on the core. This can be quite uncomfortable after birth, as the muscles are still sore and sensitive.

The Cloud T i-Size features the tried and tested Linear Side-impact Protection (L.S.P.) System for increased protection.

The first impact forces of a collision are reduced by the extended side protector facing the door. Together with the car seat’s flexible shell, it reduces impact forces by up to 25%, channelling them away from your child.

This significantly protects your baby from side impact collisions.

The newborn inlay allows your baby to snugly fit inside the car seat. Your baby is protected in an ergonomically correct position.

This is suitable for babies from 45 – 60 cm. Once they have outgrown the inlay simply remove it from the car seat and continue using it as normal, giving your baby some additional room.

The adjustable headrest offers an amazing 12 positions for a customised adjustment as your baby grows. This means the car seat adapts to the size of your baby, growing with them.

The integrated harness guide makes adjusting intuitive and quick. All you need to do is ensure the headrest is at the correct height for your baby. This will position the harness in the correct setting.

These safety features can be fitted to your growing baby within seconds, offering maximum protection.

The generous sun canopy, made from a UPF 50+ fabric, significantly protects your baby from harmful rays of the sun.

It can also act as a shield against wind, or even the hustle and bustle of the street. When not in use, the canopy can be pulled back.

The car seat can be reclined to an ergonomic, lie-flat position when your baby falls asleep. This is a universal lie flat mechanism, with the legs jutting forward and bottom raising up as the backrest drops down. With a smooth transition from lie flat to seated, your baby won’t wake up if they’ve fallen asleep.

This is especially useful when on the Isofix base, as your baby can be positioned in a lie flat setting on those long car drives, keeping them much happier.

You can connect the car seat to the matching Base T. This is significantly safer than a standard seat belt, as there are metal on metal connections to the chassis of your car.

Once attached to the base, it can be rotated to make getting your baby in and out of the car far easier than before.

Compatible with the whole T family, the base can be used with multiple car seats, growing with your baby. Once your baby has outgrown the infant carrier, you can use the next stage car seat afterwards. This makes the base suitable to 105 cm, which is about 4 years of age.

This means you won’t need to get a new base, check if it’s compatible with your car, and learn all its installation instructions again when your baby outgrows the infant carrier.

Once your car seat has been attached, you can rotate the car seat in a full 360° angle. Simply spin the car seat to face the door to take your baby in or out of the car and then spin it back to a forwards or rearwards facing position.

As long as your baby is less than 15 months of age, they must be in a rearward position, as it is significantly safer for them. After this, you can choose whether it is forward facing or not.

Equipped with an easy and secure on-click installation. Simply line the connectors to the Isofix points in your car and press in for them to connect. Then bring down the load leg, which provides additional stability and support to the car seat.

Featuring an installation indicator, this helps prevent you from incorrectly installing the Isofix and car seat with a clear traffic-light system. Red tells you it is not connected, while green means everything is correct.

The base even has an electronic beeper built into it. This will also notify you if the car seat is attached and the base is not securely connected with a constant alarm.

As your baby goes from infant carrier to toddler car seat, they can face a forward facing position after 15 months. At the front of the Isofix is a latch, which you change depending on how old your baby is.

The Aton B2 i-Size features the tried and tested Linear Side-impact Protection (L.S.P.) System for increased protection, just like the Cloud T.

The extended side protector facing the door reduces the first impact forces of a collision. This reduces impact forces by up to 25%, channelling them away from your child, together with the car seat’s flexible shell.

This significantly protects your baby from side impact collisions.

The newborn inlay allows your baby to snugly fit inside the car seat. Your baby is protected in this ergonomically correct position.

This is suitable for babies from 45 – 60 cm. Simply remove the inlay from the car seat once your baby has outgrown it and continue using the seat as normal, giving your baby some additional room.

The adjustable headrest offers an amazing 11 positions for a customised adjustment as your baby grows. The car seat adapts to the size of your baby, growing with them.

Adjusting is quick and intuitive with the integrated harness guide. All you need to do is ensure the headrest is at the correct height for your baby. The harness will be in the correct setting after this.

These safety features can be fitted to your growing baby within seconds, offering maximum protection.

The generous sun canopy, made from a UPF 50+ fabric, significantly protects your baby from harmful rays of the sun.

It can also act as a shield against wind, or even the hustle and bustle of the street. When not in use, the canopy can be pulled back.

You can connect the car seat to the matching Base T. This is significantly safer than a standard seat belt, as there are metal on metal connections to the chassis of your car.

Once attached to the base, it can be rotated to make getting your baby in and out of the car far easier than before.

Equipped with an easy and secure on-click installation. Simply line the connectors to the Isofix points in your car and press in for them to connect. Then bring down the load leg, which provides additional stability and support to the car seat.

Featuring an installation indicator, this helps prevent you from incorrectly installing the Isofix and car seat with a clear traffic-light system. Red tells you it is not connected, while green means everything is correct.

All of this will notify you if the car seat is attached and the base is not securely connected with a constant alarm.